MacGyver It!
Have you ever heard of the term "planned obsolescence?" If you haven't, it's the concept that since companies exist to make a profit, it's not in their best interest to make products that last forever. Instead, they last a few years and then things start to fail. Pieces break, electronics fail, springs fail, etc. In many cases, it's a simple matter of replacing a part, but of it had been built to last you wouldn't have to buy a replacement part.
I ran into this exact problem with our Dyson vacuum. We bought it because it's very lightweight, yet powerful enough to handle the majority of our vacuuming needs. We've had it a couple of years and just recently my wife mentioned the canister no longer stays attached when you go to empty it. Normally, it stops at the end of the rail after sliding forward. You can slide it back and forth to use gravity and momentum to empty it.
(Source)
The problem with the design is the plastic retaining tab at the front of the gray plastic rail. It stops the canister from sliding right off of the rail. With repeated use, this plastic tab weakens and eventually breaks off. To fix it, the company hopes you'll go online and pay anywhere from $15-50 to buy the replacement rail. Then, you have to remove a ridiculous number of screws to take the old rail off and put the new one on.
(Source: Amazon)
Forget that! I decided to tinker and MacGyver it!
(Source)
If you're not familiar with MacGyver, here's a brief overview of what the show is about for context.
(Source)
Rather than pay for a replacement that will fail again after a year or two, I marked the height where the canister tab would normally meet up with the plastic tab in front to catch it. I marked a spot on the rail and drilled a hole. Then, I measured the height where the tab needed to be. I found a spare machine screw in the garage, measure it, and cut it with a pair of bolt cutters. Then, I threaded the screw halfway into the hole, applied some Loctite to the threads, then fully seated the screw.
I tested it out and it worked! The canister stops a little earlier than before since the screw is further back. I did this on purpose, so I wouldn't risk the screw ripping through the plastic rail over time.
It took me about 30 minutes of work, and only involved random pieces I had on hand already. I'm not paying $15+ for another piece that will fail eventually. With ample material around the screw, this fix should last the rest of the life of the vacuum. Rather than pay money to fix things, all it takes is a little time, analysis and creativity to "MacGyver it!"
Buy DUO and stake to receive Hive dividends, tip others, have your posts curated, and grow Hive!
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO
Do you like stacking gold and silver?
Are you new to Hive, or know someone new to Hive, and want help and support?
Have you been on Hive for a while and want to help new Hive members? Join HOC and help us grow Hive and encourage new members!
You received an upvote of 100% from Precious the Silver Mermaid!
Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.
Here I thought you were going to 3D print something. These are the cases where I think having a 3D printer could be really handy!
No, this piece requires taking out like 10 screws, so this was faster.
If it wasn't such a pain to take off the old one, I would've considered buying a replacement.
!BBH
!PIZZA
Ah okay, that makes sense then!
you forget the swiss army knife, at least take a shot of it so it will be related with McGiver
!PIMP !BBH !ALIVE
!LOL you're right!
I should've put a picture of one in the post somewhere. 😆
!BBH
!PIZZA
!DUO
You just got DUO from @bulliontools.
They have 1/1 DUO calls left.
Learn all about DUO here.
lolztoken.com
But it takes me a while.
Credit: reddit
@dewabrata, I sent you an $LOLZ on behalf of bulliontools
(1/6)
Farm LOLZ tokens when you Delegate Hive or Hive Tokens.
Click to delegate: 10 - 20 - 50 - 100 HP
That's the spirit
Thanks! I hate it when they make stuff to fail!
!BBH
!DOOK
!PIZZA
Nice job! Nothing like using your MacGyver skills! He could make just about anything out a paperclip, bubblegum, and some string! lol That was a fun show!
!BBH
!PIZZA
!DOOK
Thanks!
Right? One of my favorite episodes was when he used a bike, rust and a flar to make a thermite torch. 😁
!BBH
!PIZZA
!PIMP
$PIZZA slices delivered:
bulliontools tipped shiftrox
bulliontools tipped bitcoinman
bulliontools tipped bozz
@shiftrox(2/20) tipped @bulliontools
bulliontools tipped dewabrata
bulliontools tipped kerrislravenhill
thebighigg tipped bulliontools
Come get MOONed!
That TV series filmed here in Vancouver. I recall seeing him on a set when filming Stargate some years ago.
Oh, really? Very cool!
Did you get to talk to him at all?
!BBH
!PIZZA
!ALIVE
I heard he tries to engage with fans when he had the opportunity but he was inside a security perimeter the public cannot enter. I happened to be passing by.
Hahaha, sometimes we have to solve things one way or another, and when we don't have the money to buy a new one or get it repaired, that's when we have to improvise so we can move forward xD
Right? At least this was something where I could improvise. Sometimes they make things so complicated you have to end up buying a new one.
!BBH
!PIZZA
!DOOK
True, but you know, I've always had this idea that some things seem to be made to break, like they have a hidden expiration date that makes them break just to force you to buy a new model or something like that.
!BBH !PIZZA !DUO
Oh no! @shiftrox, you are out of DUO!
Go acquire more Stake to increase your DUO standings.
(We will not send this error message for 24 hours).
Learn all about DUO here.